Iron-on labels are tough, but a bit fussy! They resist sweat, water, and friction but aren’t suited for wool or mesh fabrics.
Follow these steps:
- Use a hard surface (table or board, not ironing board).
- Set iron to 160°C, no steam.
- Pre-heat the area briefly.
- Remove the very fine iron-on sticker from the transparent backing, place it print side up.
- Cover with parchment paper.
- Apply firm, static pressure for 20–30 sec (no sliding).
- Let rest 24–48 hours before washing. Max wash temp: 60°C.
👉 Pro tip: If the label lifts after cooling, repeat the process.
🎯 Patience pays off!